DEC2680 – OPNsense® Rack Security Appliance

SKU: DEC2680 Category:

749.00

Clear


Download Brochure

(File size is approximately 5.6MB)

Description

A great performer with AMD G-Series SOC  performance in a 1U rack enclosure.
This model includes 8GB DDR3 RAM, 256GBSolid State Flash and can handle upto 3300Mbps Firewall & 600Mbps IPsec throughput .

Package Contents

  • Rack appliance
  • Matching powercord
  • Configuration cable
  • Quickstart guide

Warranty

All OPNsense® Security Appliances come with 2 Year Carry-in & Return Warranty.

Full Specifications & Model Comparison

Models DEC2680
Software
Preinstalled software OPNsense®
License Open Source + 1 year free Business Edition
Hardware Specifications
Typical Applications Firewall / Routing, VPN, IDPS & Webproxy
GbE RJ45 Ports [ 10/100/1000Mbps ] 4
USB Ports 1
Console Port 1
Internal Storage 256GB Solid State Flash
Memory 8GB DDR3
CPU Cores 4 (max frequency 1.6Ghz)
Virtual Interfaces (802.1q VLANS)1 4093
System Performance
Firewall Throughput 3300Mbps
Firewall Packets Per Second 250Kpps
Firewall Port to Port Throughput 941Mbps
Firewall Port to Port Packets Per Second 78Kpps
Concurrent Sessions 7000000
Connections Per Second 35000
Firewall Latency (average) 200us
Firewall Policies (Recommended Maximum)1 10000
IPsec VPN Throughput (AES256GCM16) 600Mbps
IPsec VPN Packet Per Second (AES256GCM16) 50Kpps
Threat Protection Throughput Packet Per Second 29Kpps
Threat Protection Throughput ~327Mbps
High Availability with State Synchronisation Requires Two
Dimensions
Height x Width x Length (mm) 244.5 (1U) x 483 (19″) x 235 (excl. panel)
Height x Width x Length (inches) 1.75 x 19 x 9.6
Form Factor 19″ Rack mountable
Weight 4.3Kg
Environment
Power Requirements 100-240VAC, 50-60Hz
Maximum Current (AC) 0.8A
Power Consumption (Typical) 25W
Heat Dissipation 85 BTU/hr
Operating Temperature 0 to +45°C
Storage Temperature -20 to +70°C
Humidity 10-90% non-condensing
Regulatory Compliance
FCC part 15 Class A, CE, Rohs

1 The user interface is designed for normal business usage, large rulesets, high number of users or interface assignments may be less practical.

Total Firewall Throughput is calculated based on system utilization and actual measured port-to-port performance (if both numbers are the same no measurement of system utilization was recorded and maximum theoretical throughput is likely to be higher). Maximum PPS is measured using IMIX. All throughput numbers are based upon maximum packets per second multiplied by standard 1514byte frame size minus additional overhead where applicable. IPsec traffic is measured using AES256GCM16 via a routed tunnel.Latency is measured as an average over 60 seconds with system at 80% of maximum load and 256byte UDP packages .  IPS performance is measured using a EMIX simulation. Concurrent sessions are based upon memory available, where one state consumes 1KB of memory and 1GB of memory is reserved for system tasks.